A complete 28mm-scale shuttle and lifeboat with a detailed, playable interior built for claustrophobic science-fiction adventures.
The Erebus Shuttle is an original modular spacecraft designed
by 2nd Dynasty for tabletop roleplaying games, skirmish games,
wargames, and display.
At slightly more than 13 inches long, the Erebus combines the confined atmosphere
of a deep-space lifeboat with enough physical room to place and move 25mm, 28mm,
and 32mm miniatures throughout its interior.
Remove the exterior sections and move play directly into the cockpit, navigation
area, engineering room, HVAC compartment, cryosleep stations, and underfloor
storage area.
The standard Erebus Shuttle exterior. Image provided by 2nd Dynasty.
A Complete Tabletop Lifeboat
The Erebus was designed to balance a deliberately confined shipboard environment
with practical tabletop playability.
- Approximately 13 inches long at roughly 1:59 scale;
- Designed for 25mm, 28mm, and 32mm miniatures;
- Fully modeled exterior and playable interior;
- Removable exterior sections provide access during play;
- Detailed bridge and cockpit;
- Engineering and HVAC compartments;
- Central navigation table;
- Three standard cryotubes;
- Underfloor storage capable of accepting additional cryotubes;
- Detailed consoles, machinery, bulkheads, and equipment; and
- Multiple optional exterior and interior upgrades.
The removable hull reveals the cockpit, engineering systems, cryotubes,
navigation area, and underfloor compartment.
Built for Science-Fiction Adventure
The Erebus works equally well as an emergency lifeboat, short-range exploration
craft, survival-horror setting, orbital shuttle, courier, or small independent vessel.
Its detailed interior can support boarding actions, rescue missions, mechanical
failures, alien encounters, derelict investigations, evacuation scenarios, and
complete adventures confined within the vessel itself.
A printed Erebus with the hull removed for tabletop play.
Optional Erebus Upgrades
Select any desired upgrades using the checkboxes above. The standard ship is
supplied when no optional upgrade is selected.
-
Alternate Thrusters: Replaces the standard main-thruster
arrangement with an alternate clustered design.
-
Turret Mount: Adds the official mounting components for a
compatible defensive turret.
-
Hull Extender: Adds one standard extension module, increasing
the vessel by approximately one inch in length and width.
-
Landing Gear: Adds landing-gear components for stable operation
on prepared planetary surfaces.
-
Aerodynamic Variant: Adds streamlined body components intended
for operation in denser atmospheres.
-
Endurance Interior: Adds a galley, fresher, and compact sleeping
facilities for longer in-system missions.
-
Manoeuvrability Pack: Adds supplementary reaction-control
thrusters for an expanded manoeuvring system.
Some upgrades affect related exterior or interior components. Canvas Temple will
contact the purchaser before production if a selected combination requires
clarification or cannot be built exactly as ordered.
Erebus Upgrade Gallery
Alternate Thrusters
A different clustered main-thruster arrangement.
Turret Mount
Provides an official mounting position for a compatible defensive turret.
Hull Extender
Adds one standard extension module for increased interior space.
Landing Gear
Adapts the Erebus for stable surface landings.
Aerodynamic Variant
Streamlined body components for operations in dense atmospheres.
Endurance Interior
Adds galley, fresher, and sleeping facilities for longer missions.
Manoeuvrability Pack
Supplementary reaction-control units improve the shuttle’s manoeuvring system.
```
What You Will Receive
- One complete Erebus Shuttle;
- Any optional upgrade components selected above;
- Unpainted PLA plastic components;
- Parts supplied unassembled;
- Access to the digital assembly instructions; and
- Replacement of materially damaged, defective, incorrect, or missing components.
Miniatures, paint, tools, scenery, electronics, batteries, and glue are not
included. Filament color may vary from the examples shown because the model is
intended to be prepared and painted by the purchaser.
Assembly Guide and Designer Information
Printing and Production
This model is custom printed to order in PLA plastic using licensed 2nd Dynasty
design files. Components are printed slowly at approximately 0.12mm layer height
to produce a detailed and durable gaming model.
Please allow approximately 2–4 weeks for printing, inspection,
packing, and shipment. Production time may vary according to the selected upgrades
and the current printing queue.
Important Information About 3D-Printed Models
Layer lines, support-contact marks, minor surface texture, and small cosmetic
variations are normal characteristics of FDM 3D printing and are not defects.
Some preparation may be required before assembly and painting.
PLA models should be stored indoors and protected from excessive heat and prolonged
direct sunlight. This product contains small components and is intended for
hobbyists age 14 and older.
Designed by 2nd Dynasty and printed under commercial license by
Canvas Temple Publishing.
